Meet the first washable zinc face mask with three layers made specifically for sensitive skin. Zinc offers similar anti-bacterial, anti-microbial and anti-odor benefits as copper, but with less environmental impact, at a lower cost and with skin-soothing benefits.
We embed zinc with softer than silk, smoother than cotton TENCEL to create a 3-ply washable face mask that offers ultimate comfort for those with the most sensitive skin, acne (maskne!), eczema, and more. Say goodbye to chafing, facial irritation and dermatitis caused by other face masks.
Our three layer face masks are guaranteed to provide a snug, comfortable fit that can be worn for hours at a time.
What makes Remedywear’s zinc face mask unique:
- Cool, breathable, super soft TENCEL fabric provides comfort, not irritation.
- Zinc fights germs and bacteria on both the inside and outside of the 3-ply mask.
- Embedded, not coated, zinc remains after 100+ washings
- 3 layer mask structure – 1st and 3rd layer in jersey knit TENCEL and zinc + 2nd layer/inside filtering layer in tightly woven TENCEL.
- Stretchy straps and mask fabric offers a snug fit, without side gaping or the need for a metal nose bridge.
- Mask attaches with straps tied behind the head or behind the ears.
Sold as one unit. Buy two – one to wear, one to wash, then repeat!
Remedywear’s unique fiber blend works well for eczema and psoriasis as well.
Learn more about the clinical study and unique fabric used in our eczema garments.
Remedywear™ was awarded the National Eczema Association Seal of Acceptance™.
Our garments are consciously made. Read about the sustainability concepts & ethics that drive our brand.
3rd Party Lab Tested
Our 3 layers of fabric were 3rd party tested by Citeve, a National Portuguese Lab with GPL (Good Practice Laboratory) Certification (the highest certification for a lab) via standards: EN ISO 9237:1995 and EN 14683:2019 Type 1 (European test to certify surgical masks).
Results were as follows:
Test for Breathability EN ISO 9237:1995: Good Test for Particle Retention EN 14683:2019: PRC ( > or = to 3 µm) (%) : 85% / PRC (between 0,5 µm and 0,7 µm) (%) : 12% CWA 17553:2020: Compliant
Non-Medical Mask Information
This face covering mask is intended to serve as a barrier mask to compliment, not override, the protection measures and the rules of social distance, which are fundamental for the control of COVID-19 and other airborne illnesses.
Remedywear face covering masks are intended for use by those who leave their homes to travel for work, school or errands and to help protect the community. Additionally, these masks are NOT intended for use by healthcare professionals in the performance of their duties, nor are they a medical device. Thus, they do not comply with the regulation of surgical masks or individual protection equipment.
Remedywear face masks should be worn for a maximum of four hours and changed whenever they are damp.
Wash before your first use and after each wear.
Machine wash using a complete wash cycle at 140°F/60°C with a mild detergent. Lay flat to dry or use a gentle cycle at a low temperature. Iron at a low-temperature setting (less than 230°F/110°C), if needed. Thoroughly dry before wearing.
The use of bleach, chemical whitening agents, fabric softeners, or conditioners will shorten the lifespan of your mask - we do not recommend them. Do not dry clean.
 Wiegand, 2013, Skin-protective effects of a zinc oxide-functionalized textile and its relevance for atopic dermatitis. Clin Cosmet Investig Dermatol; 6: 115–121.